No heat anywhere
The system may have an operating, ignition, safety-control, thermostat or circulation problem.
Edmonton boiler & hydronic service
Boiler repair in Edmonton.
No heat, uneven zones, pressure changes, a fault code, noise or a leak? Plumber YEG diagnoses boiler and hydronic-system problems for Edmonton homes and businesses, then explains what needs attention before work begins.
Boiler operationCirculation & zonesHydronic pressureResidential & commercial
5.026 Google reviews
Problem-first boiler and hydronic diagnosis
Common problems
What is the heating system doing?
Boiler trouble can start at the equipment, controls, pressure system, pumps, zones or heat-emitting units. The pattern of symptoms helps narrow the right diagnostic path.
One or more cold zones
Zone controls, valves, circulators, thermostats, trapped air or local units may be involved.
Short cycling
Frequent starts and stops can involve controls, flow, temperature sensing or system conditions.
Pressure changes
Low, high or unstable pressure can involve fill, expansion, relief, trapped air or a leak.
Noise in the boiler or pipes
Gurgling, rushing, rattling or other changes can point to air, circulation, pressure or equipment operation.
Leak near the system
The source may be the boiler, piping, a pump, valve, relief system or another hydronic component.
Pricing guidance
Boiler repair price ranges.
These selected public ranges show the typical bands for several common boiler and hydronic service paths.
Estimated Price Range
The actual price depends on diagnosis, access, equipment, parts and the confirmed repair scope.
The actual price depends on diagnosis, access, equipment, parts and the confirmed repair scope.
Assessment and common accessible service when the exact component still needs to be confirmed.
For serviceable ignition, operating, safety-control and control-system problems.
For accessible circulator, valve, zone-control and related hydronic circulation work.
For accessible fill, expansion, relief, air and pressure-control problems.
These ranges are not quotes. Plumber YEG confirms the affected system and source of the problem, then provides the actual repair price before approved work begins. Concealed piping or major equipment failure can require a different scope.
Finding the cause
Boiler-side or hydronic distribution?
A cold property does not always mean the boiler itself has failed. The heating pattern helps separate equipment operation from the system that moves and delivers heat.
The issue may be boiler-side when…
- The boiler will not start, fire or stay running.
- A recurring fault or safety warning appears.
- The entire property has no heat.
- Operating, ignition or primary controls are not responding normally.
The issue may be distribution-side when…
- The boiler makes heat but one or more zones stay cold.
- A thermostat calls but a valve, pump or zone does not respond.
- There is gurgling, rushing water or uneven heat.
- A radiator, baseboard or local heat-emitting unit is affected.
Gas odour or active water leak?
Do not continue troubleshooting the boiler. If you smell gas or a strong rotten-egg odour, leave the building or affected area. Avoid flames, smoking, electrical switches and anything that could create a spark. From a safe location, contact the gas utility or emergency services and follow their instructions.
For an active water leak, keep clear of wet electrical equipment and do not remove boiler covers or bypass safety controls. If you know the appropriate water or equipment shutoff and can operate it safely, isolate the affected system and arrange service.
What to expect
From heating symptom to confirmed repair.
Describe the pattern
Tell us whether the whole property, certain zones or one heating unit is affected.
Screen safety concerns
Gas odour, active leaks and unsafe equipment conditions are handled before normal troubleshooting.
Diagnose the system
Boiler operation, controls, pressure, circulation and affected zones are separated logically.
Approve the repair
You receive the actual repair price before approved work begins.
Recent work
Boiler and hydronic projects from Plumber YEG.
Relevant project photos are loaded from the live Plumber YEG gallery.
Loading relevant project photos…
★★★★★
“Jason was referred to us by a trusted friend. He is very knowledgeable, honest, and great to work with. I cannot tell you the peace of mind we had during all of this flooding after installing water sensors for the discount on home insurance. Thank you Plumber YEG for excellent advice and service. Highly recommend!”
Read on Google Maps →Frequently asked questions
Boiler repair questions.
How much does boiler repair cost in Edmonton?
Published Plumber YEG ranges include $450–$1,200 for boiler or hydronic assessment, $550–$1,800 for boiler operating or control repair, $550–$1,600 for circulation or zone repair, and $550–$1,500 for hydronic pressure service. The actual price is confirmed after diagnosis.
Why does my boiler run but some rooms stay cold?
When the boiler produces heat but one or more areas stay cold, the cause may be circulation, a zone control, thermostat, valve, trapped air or a local radiator or baseboard issue. Diagnosis should separate a boiler-side problem from a distribution problem.
Should I keep resetting a boiler fault code?
No. A recurring fault should be diagnosed rather than repeatedly reset, and boiler safety controls should never be bypassed.
Is a boiler leak urgent?
An active boiler or hydronic leak should be checked promptly because it can affect pressure, heating and nearby electrical equipment. Keep clear of wet electrical components. If gas odour is also present, leave the area and contact the gas utility or emergency services from a safe location.
Related services
Keep exploring.
Need help with a boiler problem?
Tell Plumber YEG what is happening and which areas are affected.